Engine Swaps

Are you looking for ways to improve your Honda Prelude’s performance? One key area to focus on is your fuel delivery system. Upgrading your fuel rail can make a big difference in how smoothly your car runs and how much power it can produce. There are many aftermarket options available, but it’s important to understand what to look for to ensure you get the best fit for your vehicle. In this article, we’ll walk you through the basics of fine-tuning your fuel delivery system by installing aftermarket fuel rails on your Honda Prelude H22A.

Fine-tuning Fuel Delivery: What You Need to Know

Your fuel delivery system consists of several components, including your fuel rail, injectors, fuel pump, and fuel pressure regulator. The fuel rail is responsible for delivering fuel from the pump to the injectors, where it is atomized and sprayed into the engine’s combustion chambers. Aftermarket fuel rails are designed to provide a more consistent flow of fuel, which can result in better performance and improved fuel efficiency. Upgrading your fuel rail can also help prevent fuel starvation during hard driving or high-speed runs.

Understanding Aftermarket Fuel Rails for Honda Prelude H22A

When choosing an aftermarket fuel rail, you need to consider several factors, including material, design, and fitment. The most common materials for fuel rails are aluminum and stainless steel. Aluminum is lightweight and corrosion-resistant, while stainless steel is more durable and resistant to heat. Fuel rail design can also vary, with some aftermarket options featuring larger diameter tubing for increased fuel flow. Fitment is also critical, as you need to ensure the fuel rail will mount securely and work with your vehicle’s fuel injectors.

Benefits of Upgrading Your Fuel Rail System

Upgrading your fuel rail system can offer several benefits, including improved fuel efficiency, increased horsepower, and smoother engine performance. By providing a more consistent flow of fuel to the injectors, aftermarket fuel rails can help prevent lean conditions that can cause engine damage. Improved fuel flow can also help your engine produce more power and respond more quickly to throttle inputs. Additionally, upgraded fuel rails can reduce fuel pressure drop during high-speed runs, helping to prevent fuel starvation.

Installing and Setting Up Your New Fuel Rail

Installing an aftermarket fuel rail requires some basic mechanical knowledge and tools, but it can be done in your garage with a little patience. You’ll need to remove your old fuel rail, install the new rail and injectors, and then set the fuel pressure using a fuel pressure gauge. It’s also a good idea to upgrade your fuel pressure regulator at the same time to ensure the entire system is working correctly.

Top Aftermarket Fuel Rails for Honda Prelude H22A

There are several high-quality aftermarket fuel rails available for the Honda Prelude H22A. Some of the top options include Skunk2, AEM, and Golden Eagle. Skunk2 offers a Pro-Series fuel rail made from 6061-T6 aluminum that features a 0.5-inch internal diameter for maximum fuel flow. AEM’s fuel rail is also made from aluminum and comes with a fuel pressure gauge port for easy tuning. Golden Eagle’s fuel rail is made from stainless steel and features a 0.625-inch internal diameter for improved fuel flow.

Get Ready to Boost Your Prelude’s Performance with Upgraded Fuel Rails

Upgrading your fuel rail system can make a significant difference in how your Honda Prelude H22A performs. A high-quality aftermarket fuel rail can provide more consistent fuel flow, improved fuel efficiency, and increased horsepower. By choosing the right fuel rail and installing it correctly, you can fine-tune your vehicle’s fuel delivery system to improve its overall performance. So get ready to hit the road with more power and smoother engine performance by upgrading your fuel rails today!

Now that you know the basics of upgrading your Honda Prelude H22A’s fuel rail system, it’s time to start shopping for the right aftermarket option for your vehicle. By considering factors such as material, design, and fitment, you can choose a high-quality fuel rail that will help your engine perform at its best. Whether you choose Skunk2, AEM, or Golden Eagle, upgrading your fuel rail can make a significant difference in how your vehicle runs and responds to your inputs. So why wait? Start shopping for your new fuel rail today and enjoy the benefits of improved fuel flow and engine performance!

The Battle of Top Mount vs. Front Mount Intercoolers===

Subaru WRX enthusiasts are always on the lookout for ways to improve their car’s performance and speed. One of the most popular upgrades is the installation of an intercooler. An intercooler is a device that cools the air flowing into the engine, which increases the horsepower and torque. When it comes to intercoolers, there are two main types: top mount and front mount. Each has its own advantages and disadvantages, and choosing the right one for your Subaru WRX can make a big difference in the car’s overall performance. In this article, we’ll take a look at the top mount vs. front mount intercoolers and how they affect the performance of your Subaru WRX.

Subaru WRX Performance: How Intercoolers Affect It

Before we dive into the advantages and disadvantages of top mount vs. front mount intercoolers, it’s important to understand how intercoolers affect the performance of your Subaru WRX. When air is compressed in the turbocharger, it can get hot, which reduces its density and oxygen content. This means that less air can enter the engine, which reduces its power output. An intercooler helps to cool the compressed air, which makes it denser and increases the amount of oxygen that can enter the engine. This results in more power and torque, which translates into faster acceleration and higher top speeds.

Top Mount Intercoolers: Pros and Cons

Top mount intercoolers are mounted on top of the engine and are typically smaller in size than front mount intercoolers. This means that they provide less cooling capacity, which can limit their effectiveness. However, because they are smaller, they can be easier to install and do not require as many modifications to the car’s air intake system. Additionally, top mount intercoolers can provide better throttle response because they are closer to the engine and there is less lag time between the turbocharger and intercooler. One disadvantage of top mount intercoolers is that they can be more prone to heat soak, which can reduce their effectiveness over time.

Front Mount Intercoolers: Pros and Cons

Front mount intercoolers are mounted in front of the car’s radiator and typically provide more cooling capacity than top mount intercoolers. This allows them to cool the compressed air more effectively, which can result in higher power output and better performance. However, front mount intercoolers are larger and require more modifications to the car’s air intake system, which can make them harder to install. Additionally, because they are farther away from the engine, there can be more lag time between the turbocharger and intercooler, which can result in slower throttle response.

Top vs. Front Mount Intercoolers: Which is Better for Your WRX?

Deciding between a top mount or front mount intercooler ultimately depends on your goals for your Subaru WRX. If you’re looking for a quick and easy upgrade that doesn’t require a lot of modifications, a top mount intercooler might be the best choice. They are easier to install and can provide good performance gains, especially if you’re not planning on pushing your car to its limits. However, if you’re serious about performance and want to get the most out of your Subaru WRX, a front mount intercooler is probably the better choice. They provide more cooling capacity and better performance gains, but require more modifications and can be more expensive.

Conclusion: Making the Right Choice for Your Subaru WRX

Choosing between a top mount and front mount intercooler can be a tough decision, but it ultimately comes down to your goals for your Subaru WRX. If you’re looking for a quick and easy upgrade that won’t break the bank, a top mount intercooler might be the best choice. However, if you’re serious about performance and want to get the most out of your car, a front mount intercooler is the way to go. Take your time, do your research, and choose the intercooler that best fits your needs and budget. With the right intercooler, you can unlock the full potential of your Subaru WRX and enjoy faster acceleration, higher top speeds, and better overall performance.

The Battle of Top Mount vs. Front Mount Intercoolers===

Top 5 Ignition Coil Upgrades for Honda Civic Si EP3: Spark Performance Boost===

When it comes to improving the performance of your Honda Civic Si EP3, upgrading the ignition coil is a great place to start. The ignition coil is responsible for providing the spark that ignites the fuel in the engine, and a higher quality coil can lead to better performance, increased horsepower, and more efficient fuel consumption. In this article, we will take a look at the top 5 ignition coil upgrades for your Civic Si EP3, and how they can improve your car’s performance.

Best Ignition Coils for Your Civic Si EP3

Before we dive into the top 5 ignition coil upgrades, it’s important to understand what makes a good ignition coil. A high-quality ignition coil should be able to provide a powerful, consistent spark, even at high RPMs. It should also be durable and built to last. With that in mind, here are the best ignition coils for your Civic Si EP3:

1. NGK Ignition Coils – NGK is a well-known brand when it comes to ignition coils, and for good reason. Their coils are durable, reliable, and capable of producing a strong spark. They are also reasonably priced, making them a great choice for anyone on a budget.

2. Denso Ignition Coils – Another reputable brand, Denso ignition coils are known for their high-quality construction and long lifespan. They are also compatible with a wide range of vehicles, including the Civic Si EP3.

3. MSD Ignition Coils – If you’re looking for a high-performance ignition coil, MSD is the way to go. Their coils are designed to deliver a powerful spark, even at high RPMs, and are built to withstand extreme conditions.

4. Accel Ignition Coils – Accel is another brand that specializes in high-performance ignition coils. Their coils are designed to provide a hotter spark than traditional coils, which can lead to better performance and increased horsepower.

5. Bosch Ignition Coils – Bosch is a well-respected brand in the automotive industry, and their ignition coils are no exception. They are built to last and capable of providing a strong spark, making them a solid choice for any Civic Si EP3 owner.

Top 5 Upgrades for Spark Performance Boost

Now that we know what to look for in an ignition coil, let’s take a look at the top 5 ignition coil upgrades for your Civic Si EP3:

1. AEM High Performance Ignition Coils – AEM’s ignition coils are designed to provide a strong, consistent spark, even at high RPMs. They are also built to withstand extreme conditions, making them a great choice for anyone who likes to push their car to the limit.

2. MSD Street Fire Ignition Coils – MSD’s Street Fire ignition coils are designed to deliver a hotter spark than OEM coils, which can lead to better performance and increased horsepower. They are also reasonably priced, making them a great choice for anyone on a budget.

3. NGK Iridium IX Ignition Coils – NGK’s Iridium IX ignition coils are designed to be more durable and long-lasting than traditional coils. They are also capable of providing a strong, consistent spark, making them a great choice for anyone looking to improve their car’s performance.

4. Denso First Time Fit Ignition Coils – Denso’s First Time Fit ignition coils are designed to be an exact replacement for your OEM coils, making them easy to install. They are also built to last and capable of providing a strong spark, making them a great choice for anyone looking to upgrade their ignition system.

5. Accel Super Coil Ignition Coils – Accel’s Super Coil ignition coils are designed to provide a hotter spark than traditional coils, which can lead to better performance and increased horsepower. They are also built to last and capable of withstanding extreme conditions, making them a great choice for anyone looking for a high-performance ignition coil.

Upgrade Your Ignition Coils and Feel the Difference

Upgrading your ignition coils can have a noticeable impact on your car’s performance. A stronger, more consistent spark can lead to better throttle response, increased horsepower, and more efficient fuel consumption. If you want to feel the difference, consider upgrading your ignition coils to one of the high-quality options listed above.

Boost Your Civic Si EP3’s Performance with Ignition Coils

If you’re looking to boost the performance of your Civic Si EP3, upgrading your ignition coils is a great place to start. A high-quality ignition coil can lead to better performance, increased horsepower, and improved fuel consumption. Consider upgrading to one of the options listed above to take your car to the next level.

High Performance Ignition Coils for Your Civic Si EP3

If you’re looking for a high-performance ignition coil for your Civic Si EP3, there are plenty of great options out there. Whether you’re looking for a hotter spark, improved durability, or better throttle response, there’s an ignition coil out there that can meet your needs.

Give Your Civic Si EP3 a Spark with These Ignition Coils

Upgrading your Civic Si EP3’s ignition coils is a great way to improve its performance and get more out of your car. Whether you’re looking for a hotter spark, improved throttle response, or increased horsepower, there’s an ignition coil out there that can help you achieve your goals. Consider upgrading to one of the options listed above to give your car the spark it needs.

Top 5 Ignition Coil Upgrades for Honda Civic Si EP3: Spark Performance Boost===

Upgrading your Civic Si EP3’s ignition coils is a great way to improve its performance and get more out of your car. Whether you’re looking for a hotter spark, improved throttle response, or increased horsepower, there’s an ignition coil out there that can help you achieve your goals. Consider upgrading to one of the high-quality options listed above to take your car to the next level. With a stronger, more consistent spark, you’ll be able to push your car harder and get more out of every drive.

The Toyota AE86 is a cult classic among car enthusiasts, revered for its lightweight design, rear-wheel drive, and superb handling. These same features also make it an excellent platform for drifting. Drifting is a driving technique that involves oversteering while maintaining control of the vehicle. It requires precise control and a lot of skill, but it’s also incredibly fun. If you own a Toyota AE86 and want to learn the art of drifting, you’ll need to upgrade your differential. In this article, we’ll show you how to do just that.

Learn the Art of Drifting with Toyota AE86

Drifting is a driving technique that originated in Japan and has become a worldwide phenomenon. It involves sliding the car sideways through a turn while maintaining control and speed. It’s a thrilling way to drive, and mastering it takes a lot of practice. To learn the art of drifting with a Toyota AE86, you need to understand the car’s characteristics and how to exploit them. This car is lightweight and has a responsive chassis, making it a natural fit for drifting. You’ll also need to understand how to use the clutch, throttle, brakes, and steering inputs to initiate and maintain a drift.

Upgrade Your Toyota AE86 Differential for Better Drifts

The differential is a crucial component in any car’s drivetrain, but it’s especially important for drifting. The differential is responsible for distributing power to the rear wheels and allowing them to rotate at different speeds. This is what allows the car to turn smoothly and maintain traction. In a standard Toyota AE86, the differential is a mechanical unit that’s prone to wear and tear. Upgrading the differential can improve your car’s handling and make it easier to initiate and maintain drifts.

The Ultimate Guide to Toyota AE86 Differential Upgrades

There are several different types of differential upgrades you can make to your Toyota AE86, each with its own benefits and drawbacks. The most common types are limited-slip differentials, welded differentials, and spool differentials. Limited-slip differentials allow the wheels to turn at different speeds while still providing some resistance to slippage. Welded differentials lock the two rear wheels together, essentially turning the car into a one-wheel-drive vehicle. A spool differential is a solid unit that provides no differential action at all. Each type of differential has its own pros and cons, and the choice ultimately comes down to personal preference.

Choosing the Right Differential Upgrade for Your Toyota AE86

Choosing the right differential upgrade for your Toyota AE86 can be tricky, but it’s essential to get it right. The type of differential you choose will affect your car’s handling, traction, and overall performance. If you’re new to drifting, a limited-slip differential is a good starting point. It provides some resistance to slippage, making it easier to maintain control of the car. If you’re more experienced and looking for more aggressive drifts, a welded differential or spool differential may be more appropriate. However, keep in mind that these types of differentials can be more challenging to control.

Toyota AE86 Drifting: Why Differential Upgrades Matter

Differential upgrades are essential for Toyota AE86 drifting because they allow the car to maintain traction while still allowing the rear wheels to rotate at different speeds. This is what makes it possible to initiate and maintain a drift. A standard differential can’t handle the stresses of drifting and is prone to failure. Upgrading your differential can improve your car’s handling, provide better traction, and make it easier to control.

How to Install a Differential Upgrade for Your Toyota AE86

Installing a differential upgrade for your Toyota AE86 is a relatively straightforward process, but it does require some mechanical knowledge and tools. The first step is to remove the old differential. The new differential can then be installed in its place, along with any necessary hardware and modifications. The process can be time-consuming but is well worth it for the improved performance and handling.

Drifting is a thrilling and challenging driving technique that requires skill, practice, and the right equipment. Upgrading your Toyota AE86’s differential is essential for drifting, and there are several different types of differential upgrades to choose from. Whether you’re new to drifting or an experienced pro, upgrading your differential can improve your car’s handling, provide better traction, and make it easier to control. With the right setup, you’ll be able to slide around corners like a pro and take your drifting skills to the next level.

Boost Your Ride: Top 5 Intercooler Piping Kits for Subaru Legacy GT ===

If you own a Subaru Legacy GT, then you’re probably already well aware of its impressive performance capabilities. However, even the most powerful cars could always use a little boost. One way to achieve this is by upgrading your car’s intercooler piping kit. By increasing the amount of air flowing through your intercooler, you can improve your car’s overall boost response and performance. In this article, we’ll explore the top 5 intercooler piping kits for Subaru Legacy GT, so you can take your car to the next level.

Get Ahead of the Game with These Legacy GT Intercooler Piping Kits

The first intercooler piping kit on our list is the Mishimoto Legacy GT Intercooler Kit. This kit features mandrel-bent aluminum pipes that are designed to maximize air flow while minimizing turbulence. It also comes with high-quality silicone hoses that are both heat- and pressure-resistant, so you can count on them to last for years to come.

Next up is the Grimmspeed Legacy GT Intercooler Piping Kit. This kit is designed to improve air flow by eliminating the restrictive factory Y-pipe. The Grimmspeed kit features mandrel-bent aluminum piping that is powder-coated for added durability. It also comes with a high-quality silicone hose that can withstand high temperatures and pressures.

Maximize Your Boost Response: Top 5 Intercooler Piping Kits

The COBB Tuning Legacy GT Intercooler Piping Kit is another great option for those looking to maximize boost response. This kit features a larger intercooler core and larger piping than the factory setup, allowing for more air flow and better cooling. It also comes with reinforced silicone hoses that are designed to handle high temperatures and pressures.

If you’re looking for a more affordable option, the Invidia Legacy GT Intercooler Piping Kit is a great choice. This kit features lightweight aluminum piping that is mandrel-bent for maximum air flow. It also comes with high-quality silicone hoses that are resistant to heat and pressure, making them a great choice for those who want to improve their boost response without breaking the bank.

Must-Have Upgrades: Best Intercooler Piping Kits for Subaru Legacy GT

Last but not least, we have the Perrin Performance Legacy GT Intercooler Piping Kit. This kit features mandrel-bent aluminum piping that is designed to eliminate restrictive bends and maximize air flow. It also comes with high-quality silicone hoses that are both heat- and pressure-resistant, making them a great choice for those who want a reliable upgrade.

Overall, each of these intercooler piping kits is designed to improve boost response and overall performance in your Subaru Legacy GT. Whether you’re looking for a more affordable option or something that offers maximum performance gains, there’s an option on this list that’s sure to fit your needs. So why wait? Upgrade your ride today and experience the difference for yourself.

Take Your Legacy GT to the Next Level with These Intercooler Piping Kits

By upgrading your Legacy GT’s intercooler piping kit, you can take your car’s performance to the next level. With better air flow and improved cooling, you’ll experience faster boost response and more power when you need it most. So don’t settle for stock – upgrade your ride today with one of these top intercooler piping kits.

Up Your Boost Game: Top 5 Intercooler Piping Kits for Subaru Legacy GT Owners

In conclusion, if you’re a Subaru Legacy GT owner looking to improve your car’s performance, then upgrading your intercooler piping kit is a must. Not only will you experience better boost response, but you’ll also enjoy increased power and performance overall. So check out our top 5 intercooler piping kits for Legacy GT and take your ride to the next level today!

Subaru WRX STI VA is a car that combines elegance and high performance. The sound of its engine is thrilling, but do you want to enhance your driving experience to the next level? The best way to do so is by removing the sound tube. Keep reading to learn more about the best sound tube delete for Subaru WRX STI VA and how it can improve your driving experience.

The Best Sound Tube Delete for Subaru WRX STI VA

The best sound tube delete for Subaru WRX STI VA is the Mishimoto Sound Delete Pipe. It is made of high-quality aluminum material and is designed to fit precisely with your Subaru. This product is specially designed to remove the resonator chamber, providing your engine with a more aggressive and thrilling sound. Moreover, this sound tube delete improves the airflow for improved performance.

Improve Your Driving Experience with Enhanced Engine Sound

Enhancing your engine’s sound can make your driving experience more enjoyable, and the Mishimoto Sound Delete Pipe is perfect for achieving this. It amplifies the engine’s sound, so you can hear it working as you drive, which increases driver control. You’ll feel like you’re in a race car as you accelerate, and the sound will make your driving experience more exciting.

Why Removing the Sound Tube is the Way to Go

The sound tube is responsible for reducing the engine noise, which can dampen the driving experience. Removing the sound tube allows the engine to produce a raw and thrilling sound that can make your driving experience more enjoyable. The Mishimoto Sound Delete Pipe is an easy and affordable way to remove the sound tube and produce the best results.

Easy Installation Process for Maximum Results

Installing the Mishimoto Sound Delete Pipe is a simple process that requires basic tools. It fits directly into the engine’s intake system and removes the sound tube resonator. You can install it within minutes, and it doesn’t require any special tools or skills. The sound of the engine will change instantly and you’ll be able to hear the improvement right away.

Take Your Subaru WRX STI VA to the Next Level

The Subaru WRX STI VA is a powerful and fast car, but removing the sound tube can take it to the next level. With the Mishimoto Sound Delete Pipe, you’ll get a high-performance sound that can make your vehicle stand out on the road. The sound will make you feel like you’re racing, giving you a thrilling driving experience.

Get the Loud and Proud Sound You Deserve!

The sound of your engine is an essential part of the driving experience. The Mishimoto Sound Delete Pipe allows you to enjoy a loud and proud sound that can make you feel like a true racer. You’ll be able to hear the engine roar and feel the power of the car as you drive. This product is also compatible with several Subaru WRX STI VA models, so you can get the sound you deserve.

In conclusion, if you want to improve your driving experience, the Mishimoto Sound Delete Pipe is the way to go. It is designed to remove the sound tube resonator and produce a raw and thrilling sound that can make your driving experience more enjoyable. Installing it is simple, and it doesn’t require any special tools or skills. Get the loud and proud sound you deserve with the Mishimoto Sound Delete Pipe.

B-Series Engine Swaps: The Ultimate Upgrade for Your Honda Civic or Integra

Are you looking to take your Honda Civic or Integra to the next level? Look no further than a B-series engine swap. B-series engines are incredibly powerful and widely available, making them the perfect choice for enthusiasts looking to upgrade their vehicle’s performance. In this article, we will provide you with a step-by-step guide to the B-series engine swap process for Civics and Integras. We’ll also discuss the power of B-series engines and provide you with essential tools and tips for a successful engine swap.

Step-by-Step Guide: B-Series Engine Swap Process for Civics and Integras

Before you begin your engine swap, it’s important to have a clear plan in place. Start by selecting the right B-series engine for your Honda Civic or Integra. Once you’ve selected your engine, you’ll need to gather the necessary tools and parts. This includes an engine hoist, engine stand, wrenches, sockets, and various other tools. You’ll also need to purchase new motor mounts, wiring harnesses, and other engine-related parts.

Once you have all of the necessary tools and parts, you can begin the engine swap process. This involves removing the old engine and replacing it with the new B-series engine. Start by disconnecting all of the wiring and hoses from the old engine. Then, use the engine hoist to lift the old engine out of the car. Next, install the new motor mounts and attach the new B-series engine to the engine stand. You’ll then need to transfer all of the necessary parts and accessories from the old engine to the new engine.

After you’ve transferred all of the necessary parts, it’s time to install the new engine in your Honda Civic or Integra. Use the engine hoist to carefully lower the new engine into place and attach it to the motor mounts. Once the engine is in place, you’ll need to reconnect all of the wiring and hoses. Finally, start the engine and make any necessary adjustments to ensure that it’s running smoothly.

Unlock Your Honda’s Beast Mode: The Power of B-Series Engine Swaps

B-series engines are known for their incredible power and performance. They are capable of producing high horsepower and torque, which can significantly improve the speed and acceleration of your Honda Civic or Integra. B-series engines also offer a range of aftermarket parts and upgrades, making it easy to customize your engine to suit your specific needs.

In addition to performance improvements, B-series engine swaps can also improve the overall handling and braking of your vehicle. This is because B-series engines are often lighter and more compact than stock engines, which can improve the weight distribution and balance of your car.

Essential Tools and Tips for Your B-Series Engine Swap Adventure

If you’re thinking of doing a B-series engine swap, there are a few essential tools and tips that you’ll need to keep in mind. First, make sure that you have all of the necessary tools and parts before you start the engine swap process. This will help you avoid delays and ensure that the process goes smoothly. It’s also important to have a clear plan in place and to take your time during each step of the process.

Another important tip is to seek the advice of experienced mechanics or engine builders. They can provide you with guidance and support throughout the engine swap process, helping you avoid common pitfalls and ensuring that your engine swap is a success.

So, there you have it – the ultimate guide to B-series engine swaps in Honda Civics and Integras. By following our step-by-step guide, you can upgrade your vehicle’s performance and unlock its full potential. Just remember to take your time, have the right tools and parts, and seek the advice of experienced mechanics or engine builders. With a little patience and perseverance, you can turn your Honda into a high-performance machine.

The Subaru Impreza WRX STI is known for its impressive power and performance, but what about its ability to stop? Upgrading your vehicle’s brakes is a crucial step to achieving optimal safety and performance. If you’re looking to take your Subaru to the next level, consider investing in a big brake kit. In this guide, we’ll take a look at everything you need to know about upgrading your vehicle’s stopping power.

Upgrade Your Subaru Impreza with Big Brake Kits

A big brake kit is a performance upgrade that replaces the factory braking system with larger, high-performance components. These kits usually consist of larger brake rotors, calipers, and pads that work in harmony to provide increased stopping power. Upgrading to a big brake kit is particularly important for high-performance vehicles like the Subaru Impreza WRX STI, as the factory braking system may not be able to handle the demands of intense driving.

Get More Stopping Power: A Guide for WRX STI Owners

WRX STI owners know that their vehicles are designed for power and speed, but stopping power is just as important. Upgrading to a big brake kit can improve your vehicle’s ability to stop on a dime, even at high speeds. With larger rotors and calipers, you’ll notice a significant improvement in braking performance. Plus, big brake kits tend to have a more aggressive look, enhancing the overall aesthetic of your vehicle.

Don’t Skimp on Brakes: The Importance of Upgrades

Upgrading your Subaru Impreza’s brakes is not a step to be taken lightly. Your vehicle’s brakes are arguably the most important safety feature, and skimping on upgrades could put you and your passengers at risk. By investing in a big brake kit, you’re not only improving your car’s performance, but you’re also making it safer to drive.

What to Look for in a Big Brake Kit for Your Subaru

When shopping for a big brake kit, there are a few key factors to consider. Firstly, make sure the kit is designed specifically for your Subaru model. This will ensure proper fit and function. Secondly, look for a kit that includes high-quality components, such as stainless steel brake lines and slotted or drilled rotors. Lastly, consider the level of performance you’re looking to achieve and choose a kit that meets those needs.

Top Picks for Big Brake Kits for WRX STI

There are a variety of big brake kits available on the market, but some stand out above the rest. The Brembo Gran Turismo kit is a popular choice for WRX STI owners, offering excellent stopping power and a sleek design. Another top pick is the StopTech ST-40 kit, which includes AeroRotors for improved cooling and reduced brake fade.

Boost Your Braking Performance with These Kits

Upgrading your Subaru Impreza’s brakes with a big brake kit is a smart investment that will pay off in improved performance and safety. Whether you’re looking to take your vehicle to the track or simply want better stopping power for daily driving, a big brake kit is the way to go. Consider the factors mentioned above and choose a kit that meets your needs. With the right kit, you’ll be able to stop on a dime and feel more confident behind the wheel.

In conclusion, upgrading your Subaru Impreza WRX STI’s brakes with a big brake kit is an important step to achieving optimal performance and safety. Don’t skimp on upgrades and choose a kit that’s designed specifically for your vehicle and includes high-quality components. With the right kit, you’ll notice a significant improvement in stopping power and overall driving experience.

Your Comprehensive Guide to B-Series Engine Swaps

If you’re looking to upgrade the performance of your Honda Civic or Acura Integra, one of the most popular options is to swap out the factory engine for a B-Series engine. These engines are known for their impressive power and customization options, making them a go-to choice for car enthusiasts everywhere. However, if you’re unfamiliar with engine swaps, the process can be overwhelming and intimidating. That’s why we’ve put together this comprehensive guide to B-Series engine swaps in Hondas and Acuras. From choosing the right engine to tuning it for maximum horsepower, we’ve got you covered.

Choosing the Right B-Series Engine for Your Civic or Integra

When it comes to B-Series engines, there are several different options to choose from. The most popular choices are the B16, B18, and B20 engines. The B16 is known for its high-revving capability and impressive power-to-weight ratio, making it an excellent choice for Honda Civics. The B18 is slightly larger and heavier than the B16, but it’s also more powerful, making it a great choice for Acura Integras. Finally, the B20 is the largest and most powerful of the three options, but it’s also the heaviest. It’s an excellent choice for those who want maximum power but don’t mind sacrificing some weight.

Step-by-Step Guide to Removing Your Old Engine

Before you can install your new B-Series engine, you’ll need to remove your old engine. This process can be time-consuming and intimidating, but with the right tools and a little know-how, it’s a relatively straightforward process. The first step is to disconnect the battery and remove any necessary components, such as the exhaust system and radiator. Next, remove the bolts that hold the engine in place and carefully lift it out of the car. Make sure to label all of your wires and hoses so that you can reconnect them later.

Installing Your B-Series Engine Like a Pro

Once you’ve removed your old engine, it’s time to install the new B-Series engine. This process is essentially the reverse of removing the old engine, but there are a few additional steps involved. First, you’ll need to attach the engine mounts and transmission mount to the new engine. Next, carefully lower the engine into the car and bolt it into place. Finally, reattach all of your wires and hoses, and install any necessary components, such as the exhaust system and radiator.

Wiring Your B-Series Engine for Optimal Performance

Proper wiring is essential for getting the most out of your B-Series engine. Make sure to use high-quality wires and connectors, and carefully follow the wiring diagram for your specific engine. You may need to make custom modifications to the wiring in some cases. Additionally, make sure to properly ground your engine to reduce the risk of electrical problems.

Tuning Your B-Series Engine for Maximum Horsepower and Torque

Once your B-Series engine is installed and wired, it’s time to tune it for maximum performance. This can be done using a variety of methods, including engine management systems, tuning software, and dyno testing. Make sure to work with a reputable tuner or mechanic who is experienced with B-Series engines. They’ll be able to adjust your engine’s fuel and air mixtures, ignition timing, and other parameters to optimize its performance.

By following this comprehensive guide to B-Series engine swaps in Honda Civics and Acura Integras, you’ll be able to upgrade your car’s performance like a pro. Whether you’re looking for high-revving power or maximum torque, B-Series engines offer unparalleled customization options. Just make sure to carefully choose the right engine for your car, follow the correct steps for removing and installing it, properly wire your engine, and tune it for maximum performance. With a little patience and know-how, you’ll have a car that turns heads and dominates the road.

The Quest for Perfect Handling

When it comes to getting the most out of your Honda CRX, ensuring the suspension is fine-tuned is essential. The suspension of your Honda CRX is what helps provide better handling, comfort, and safety. The adjustable control arm provides an ideal solution to better handling, allowing you to fine-tune your car’s suspension to your liking. With the right geometry, adjustable control arms can help you take corners at higher speeds, draw out more noticeable performance, and provide a smoother ride. In this article, we’ll discuss how to fine-tune suspension geometry and install adjustable control arms on your Honda CRX.

Honda CRX Suspension: The Basics

The Honda CRX suspension includes the strut assembly, control arms, steering knuckle, and spindle. The strut assembly consists of a spring and damper, while the control arms are responsible for holding the wheel hub and attaching it to the chassis. The steering knuckle enables turning, and the spindle connects to the brake rotor and wheel hub. The suspension system is designed to provide a comfortable ride, while improving handling and safety on the road.

Understanding Control Arms: What You Need to Know

The control arm is an essential component of the suspension system, linking the steering knuckle and wheel assembly to the framework of the car. The control arms are designed to support the weight of the car and absorb road shocks. Control arms have bushings that help dampen vibrations, and some adjustable control arms have spherical bearings that allow for greater adjustability and improved suspension geometry.

Fine-Tuning Geometry: The Benefits of Adjustable Control Arms

Adjustable control arms are a more versatile option than fixed control arms since they provide more adjustability to your vehicle’s suspension geometry. A control arm modification can improve your Honda CRX’s handling, decrease body roll, and increase grip. Adjustable control arms allow you to make more extensive settings adjustments, including alignment parameters, camber, and caster. By adjusting the suspension geometry, you can improve handling and make your Honda CRX more responsive.

How to Install Adjustable Control Arms on Your CRX

Installing adjustable control arms on your Honda CRX is easier than you might think. The process involves jacking up the car and using hand tools to remove the old control arm and install the new adjustable control arm. When you’re replacing control arms, it’s a good idea to replace the bushings and ball joints at the same time. Installing adjustable control arms requires some mechanical expertise, so if you’re not familiar with car mechanics, it’s best to ask a professional.

Conclusion: Increase Your CRX’s Performance with Adjustable Control Arms

Honda CRX owners who want to improve their vehicle’s handling and suspension geometry should consider adjustable control arms. By fine-tuning the suspension with adjustable control arms, you can enjoy a more precise and comfortable ride. With adjustable control arms, you can customize your suspension to suit your driving style, making your Honda CRX more fun to drive. Installing adjustable control arms on your Honda CRX is a cost-effective way to improve your vehicle’s performance and make it feel more like a race car. By following the installation instructions carefully and seeking professional assistance when necessary, you can enjoy a better-performing and more agile Honda CRX.