Mitsubishi Galant VR-4 Brake Replacement: Steps to Superior Braking

Mitsubishi Galant VR-4 Brake Replacement===
The Mitsubishi Galant VR-4 is a powerful and sporty sedan that demands superior braking performance. As a responsible car owner, it is crucial to ensure that your brakes are in top condition to guarantee safety on the road. Whether you are experiencing brake wear or simply want to upgrade your braking system, a brake replacement is a task that requires attention to detail and precision. In this article, we will provide you with a step-by-step guide on how to replace the brakes of your Mitsubishi Galant VR-4, along with valuable tips for achieving superior braking performance.

[amazon_auto_links id="12686"]

===Step-by-Step Guide to Replace Mitsubishi Galant VR-4 Brakes===
Replacing the brakes of your Mitsubishi Galant VR-4 may seem like a daunting task, but with the right tools and knowledge, you can successfully complete the job. Here is a step-by-step guide to help you through the process:

  1. Gather the necessary tools and materials: Before starting the replacement, make sure you have all the required tools, including a jack, jack stands, lug wrench, brake cleaner, brake grease, a C-clamp, and of course, the new brake pads and rotors.

  2. Lift and secure the vehicle: Use a jack to lift your Mitsubishi Galant VR-4 off the ground. Once lifted, secure the car using jack stands for added safety.

  3. Remove the old brake pads and rotors: Start by removing the brake caliper bolts and sliding the caliper off the rotor. Carefully remove the brake pads and set them aside. Next, remove the rotor by unbolting it from the hub.

  4. Install the new brake rotors: Clean the hub surface thoroughly and place the new rotor onto the hub. Secure it in place with the bolts provided.

  5. Install the new brake pads and caliper: Apply a thin layer of brake grease to the back of the new brake pads and insert them into the caliper bracket. Use a C-clamp to compress the caliper piston and make room for the new pads. Slide the caliper back onto the rotor and bolt it into place.

  6. Repeat the process for the remaining wheels: Follow the same steps for the other wheels, ensuring that you clean and grease the components properly before installation.

===Top Tips for Achieving Superior Braking in Mitsubishi Galant VR-4===
While the brake replacement process is essential for maintaining optimal braking performance in your Mitsubishi Galant VR-4, there are additional tips you can follow to achieve superior results:

  1. Bed in the new brake pads: After installing the new brake pads, it is crucial to properly bed them in. This involves gradually increasing the braking force over a period of time to allow the pads to properly mate with the rotors.

  2. Check and adjust the brake fluid: Regularly inspect the brake fluid level and make sure it is at the recommended level. If necessary, top it up using the manufacturer’s recommended brake fluid.

  3. Monitor brake wear: Keep an eye on the wear indicators on your brake pads. Replace them as soon as they reach the minimum thickness to avoid damaging the rotors and compromising braking performance.

  4. Avoid harsh braking: While the Mitsubishi Galant VR-4 is a performance vehicle, it is important to avoid aggressive or excessive braking. This can cause unnecessary wear and tear on the braking system.

  5. Maintain a safe following distance: By maintaining a safe distance from the vehicle in front of you, you can reduce the need for sudden and harsh braking, preserving the life of your brake pads and rotors.

  6. Regularly inspect and clean brake components: Inspect your brake components for any signs of damage or wear. Clean them regularly to remove debris and prevent contamination that may affect braking performance.

===Choosing the Right Brake Pads for Mitsubishi Galant VR-4===
When it comes to choosing the right brake pads for your Mitsubishi Galant VR-4, there are several factors to consider:

  1. Driving style: Depending on your driving style, you may prefer different types of brake pads. If you drive aggressively or participate in track events, performance or racing brake pads may be more suitable. For daily commuting and occasional spirited driving, a high-performance street pad should suffice.

  2. Brake pad material: Brake pads are available in different materials, each with unique characteristics. Semi-metallic pads offer good performance and durability, while ceramic pads provide less noise and dust. Consider your priorities and choose accordingly.

  3. OEM vs. aftermarket pads: Original Equipment Manufacturer (OEM) pads are designed specifically for your Galant VR-4 and may offer the best fit and performance. However, aftermarket pads can sometimes provide superior performance or value. Research and choose a reputable brand that meets your needs and budget.

  4. Consult with experts: If you are unsure about which brake pads to choose, it is always a good idea to consult with automotive experts or fellow enthusiasts who have experience with the Galant VR-4. They can offer valuable insights and recommendations based on their firsthand experience.

===Common Brake Replacement Mistakes to Avoid in Mitsubishi Galant VR-4===
While replacing the brakes of your Mitsubishi Galant VR-4, it is crucial to avoid common mistakes that can compromise braking performance and safety:

  1. Reusing old hardware: When replacing your brake pads and rotors, it is important to also replace the hardware such as caliper bolts, shims, and clips. Reusing old hardware can lead to improper fitment and compromised braking performance.

  2. Neglecting to lubricate brake components: Properly lubricating the caliper pins, slides, and contact points is crucial to ensure smooth and even braking. Neglecting this step can result in uneven pad wear, noise, and reduced braking efficiency.

  3. Failing to properly torque bolts: Brake caliper bolts and rotor bolts should be tightened to the manufacturer’s specifications. Failure to do so can lead to rotor warping, uneven pad wear, and potential caliper damage.

  4. Skipping the brake bleeding process: After replacing the brake pads and rotors, it is important to bleed the brake system to remove any air bubbles. Neglecting this step can result in a spongy brake pedal and reduced braking performance.

  5. Rushing the bedding-in process: Properly bedding in the new brake pads is essential for optimal performance and longevity. Rushing this process can lead to uneven pad deposits, reduced braking efficiency, and increased rotor wear.

  6. Neglecting to perform a thorough test drive: Once the brake replacement is complete, take your Mitsubishi Galant VR-4 for a test drive to ensure everything is functioning properly. Pay attention to any unusual noises, vibrations, or inconsistencies in braking performance.

===Maintaining the Braking System of Your Mitsubishi Galant VR-4===
Regular maintenance is key to prolonging the lifespan and performance of your braking system. Here are a few tips to help you maintain the braking system of your Mitsubishi Galant VR-4:

  1. Regularly inspect the brake pads and rotors: Check the condition of your brake pads and rotors visually. Look for signs of wear, cracking, or uneven wear patterns. Replace any components that show signs of significant wear or damage.

  2. Flush and replace brake fluid: Brake fluid absorbs moisture over time, which can lead to reduced braking performance. It is recommended to flush and replace the brake fluid every two to three years, or as specified by the manufacturer.

  3. Keep the brake system clean: Regularly clean the brake components to remove dirt, debris, and brake dust. Use a brake cleaner and a soft brush to remove any buildup that may affect braking performance.

  4. Monitor brake pedal feel: Pay attention to any changes in brake pedal feel, such as increased softness or sponginess. These could be signs of air in the brake lines or other issues that require immediate attention.

By following these maintenance tips and performing regular inspections, you can ensure that your Mitsubishi Galant VR-4’s braking system remains in optimal condition, providing you with superior braking performance and peace of mind on the road.

Replacing the brakes of your Mitsubishi Galant VR-4 is a task that requires attention to detail and proper execution. With the step-by-step guide provided, along with our tips for achieving superior braking performance, you can confidently replace your brake pads and rotors while maintaining the safety and performance of your vehicle. Remember to choose the right brake pads for your driving style and consult experts if needed. Lastly, regular maintenance and proper care of your braking system will ensure longevity and optimal performance. Stay safe and enjoy the exhilarating driving experience that your Mitsubishi Galant VR-4 offers.